Image default
Home improvement

The Best Options in Polished Plastering for You

Set location of sewage outlets on walls. The height of the siphons depends on the height of the sinks: on bench sinks with built-in sink, the outlet for the siphon is about 60cm, and the distance between the siphon and the bench varies around 20cm.

Check the height and vertical alignment of the outlets and shower taps (with positioning of the outlet box). Shower faucets should have a height of around 110cm. The shower outlet is between 200cm and 210cm above the floor unless there are basketball players in the house. You can now check this website for the best results.

Plaster

The plaster itself is a mixture of cement and sand (pink and washed) that is thinner and more fragile than concrete, which takes gravel. First this mass is splashed on the wall, forming the chapisco. Then large spoonfuls of this mass are thrown hard into the wall to form the plaster. And then the mason, with a huge rectangular aluminum bar (the ruler), smooth these balls of dough to make them completely level and smooth, forming the plaster.

The installation phase should be very well planned and done right away because breaking plaster to change something is a pity, and it can even be a lot of work if no one else remembers where exactly that damn pipe was going. This is halfway to finishing, and you should start thinking about the wallcoverings that will be used. You have to be careful in the mass: a plaster that takes a lot of sand to save cement is too brittle and crumbly, which in practice will mean a lot of headache when you want to hit a nail in the wall to put a picture, for example.

Window frames

In the plastering phase you already need to keep in mind a part of the finish you want for the home. The window frames are an example of this. It is at this stage that the windows and portals are installed, in the case of metal frames, PVC or wood, or frames are made if you have opted for tempered glass windows and / or doors (the popular luxury shower).

  • “Framing” a window is simply towing the inside of it, leaving it with a finished look, the way it will look to receive the paint and the glass. The internal doors, specifically the wooden ones, are composed of several items. Some loggers currently sell door kits that are installed at one time in the finishing phase with polyurethane foam.

Last Words

To use these kits, you just have to leave the portals framed. Already in the traditional system (which is still cheaper), it is in the plastering phase that you need to buy and install the portals, just thembuying the doors themselves and the straighteners (the frames that surround the portals) is risky as they can pick up dirt, mildew and moisture until they reach the finishing stage, which is when they are actually installed. Decide now whether your doors and their portals and smoothing will be painted or varnished: If you want to maintain the natural hue of the wood, you will need to install the already sealed and varnished portals so that the cement will not stain.

Leave a Comment